Evnroll EV5.2 Midlock Mallet Putter - Midlock Grip

The Evnroll EV5.2 Midlock Mallet Putter (Midlock Grip) is where tradition meets technology. It features a standard single top sightline and two cavity sightlines that draft off the rear centre line for those players who prefer multiple sightlines in their setup process along with a linear rear wing for macro aimers. Perfect for our Midlock set-up.

Features & Benefits:

• Adjustable six-point weighting
  The addition of six weight ports provides precision weighting for targeted swing weighting as well as dynamic toe flow options and perimeter weighting MOI benefits.
• MIDLOCK Armlock Made Easy
  The EV5.2v Midlock Putter is just 6” longer than the length required for a conventional setup. The 6” extra pistol section is the part that extends above the hands. So if you use a 33” putter then you would use a 39” Midlock putter.
• No more special shaft and heavy head weight
  The secret is in the patented grip design. The new Midlock Grip features the deepest pistol dimension allowed by the USGA and R&A. By positioning the grip sideways the deep pistol pushes the shaft angle away from the mid-forearm reducing the typical 9 degrees of loft to just 4 degrees, similar to a simple forward press. This comfortable setup allows for an effortless one-piece putting stroke with no moving parts.
• SWEETFACE
  The EV5.2 Midlock Hatchback Mallet Putter utilises Evnroll's Patented SWEETFACE technology.
• Premise:
  On a 25-foot putt a ball hit ½” off centre, outside the Sweet Spot (centre of percussion), will travel 6” to 8” offline and 12” to 18” shorter. That miss-hit is a missed putt

How it works:

• Zero Dispersion - A series of closely spaced variable-width channels that are wider in the centre and get gradually narrower toward the heel and toe. This creates a precisely calibrated inward v-shape from both the heel and toe that progressively redirects the ball down the target line.
• Even Roll Distance - Because the channels get narrower away from the centre, the spacing gets wider. This increase in contact surface means more energy transfer and replaces the energy lost when a ball is hit away from the sweet spot. So centre and off-centre hits travel the same distance.
  
  

Specifications:

• CNC Milled in Carlsbad, California USA
• Head Material: 303 stainless steel
• Colour: Silver satin finish with black paint fill
• Loft Angle: 4 degrees
• Lie Angle: 71 degrees
• Stock Grip – Midlock
• Length: Measured from center of leading edge to top of grip
• Shaft: Black armour stepless shaft with .370” tip
• Shafting: Straight shaft mounted into an overfit hosel
• Toe Hang Spec: Long Slant 15 degrees of toe hang