Evnroll EV5.2 Midlock Mallet Putter - Midlock Grip

The Evnroll EV5.2 Players Mallet Midlock is where tradition meets technology.

The EV5.2 Midlock features a standard single top sightline and two cavity sightlines that draft off the rear centre line for those players who prefer multiple sightlines in their setup process along with a linear rear wing for macro aimers. Perfect for our Midlock set-up.

Adjustable six-point weighting
The addition of six weight ports provides precision weighting for targeted swing weighting as well as dynamic toe flow options and perimeter weighting MOI benefits.

MIDLOCK - Armlock Made Easy
The EV5.2v Midlock Putter is just 6” longer than the length required for a conventional setup. The 6” extra pistol section is the part that extends above the hands. So if you use a 33” putter then you would use a 39” Midlock putter.

No more special shaft and heavy head weight. The secret is in the patented grip design. The new Midlock Grip features the deepest pistol dimension allowed by the USGA and R&A. By positioning the grip sideways the deep pistol pushes the shaft angle away from the mid-forearm reducing the typical 9 degrees of loft to just 4 degrees, similar to a simple forward press. This comfortable setup allows for an effortless one-piece putting stroke with no moving parts.

SWEETFACE
The EV5.2 Midlock Hatchback Mallet Putter utilises Evnroll's Patented SWEETFACE technology.

Premise: On a 25-foot putt a ball hit ½” off centre, outside the Sweet Spot (centre of percussion), will travel 6” to 8” offline and 12” to 18” shorter. That miss-hit is a missed putt.

How it works:
Zero Dispersion - A series of closely spaced variable-width channels that are wider in the centre and get gradually narrower toward the heel and toe. This creates a precisely calibrated inward v-shape from both the heel and toe that progressively redirects the ball down the target line.

Even Roll Distance - Because the channels get narrower away from the centre, the spacing gets wider. This increase in contact surface means more energy transfer and replaces the energy lost when a ball is hit away from the sweet spot. So centre and off-centre hits travel the same distance.

Specifications:

• CNC Milled in Carlsbad, California USA
• Head Material: 303 stainless steel
• Colour: Silver satin finish with black paint fill
• Loft Angle: 4 degrees
• Lie Angle: 71 degrees
• Stock Grip – Midlock
• Length: Measured from center of leading edge to top of grip
• Shaft: Black armour stepless shaft with .370” tip
• Shafting: Straight shaft mounted into an overfit hosel
• Toe Hang Spec: Long Slant 15 degrees of toe hang